Basic Info.
Transport Package
Standard Seaworthy Anti Moisture
Product Description
4-colour CI Flexo Printing Machine
Advantage:- CI (central impression) Flexo Printing Machine is for printing of both paper and plastic film. Really ECO friendly.
- CI gives better colour registration. The printing material is to lie against the big central impression roller and therefore registration is much more stable and much better, especially good for stretchable materials.
- All colour printing units are transmitted by the central drum. Gear transmission. Smaller tolerance. Registration accuracy is improve.
- The machine is equipped with both blower and heaters. Heating employed a central temperature control system, PID temperature control and gives independent heat sources.
- With independent drying chamber and cool air system. After- printing ink sticking is absolutely avoided.
- Rollers are made of special steel + specialized treatment. Shaking error is greatly reduced.
- Printing cylinder did both dynamic balance and static balance treatment, plus hard anode oxidation treatment. Nearly no resistance or jumping error.
- With specialized gear transmission devices. Accurate printing quality.
- Top configuration is available at request.
Key technical parameter:
Model | YTC4800, YTC41000, YTC41200,YTC41400,YTC41600 |
Feed-in width | 800mm, 1000mm, 1200, 1400, 1600 mm |
Valid print width | 760mm, 960mm, 1160, 1360, 1560 mm |
Colour qty | 4 |
Material | Paper, film, no-woven fabric,foils |
Print plate thickness | 1.7, 2.38 mm or at request. |
Print length | Standard 400 mm. 300-1,000 mm at request. |
Mechanic speed | 200 MPM |
Print speed | 150 MPM |
Register accuracy | Longitudinal +/- 0.2mm, Transverse +/- 0.2mm |
Structure type | CI |
Gear module | 1.5mm |
Heating method | Electrical heating |
Max (dry chamber) temperature | 80 degrees centigrade (indoors 20D) |
Paper core | 3" |
Unwind rewind diameter | 1,200 mm |
Applicable ink | Water base in/ solvent ink |
Net weight | 7000 kg, 7500 kg, 8,000, 8500, 9000, 9500 kg |
Dimensions | 6.2x2.0x3.2m, 6.2x2.2x3.2m, 6.2x2.4x3.2m, 6.2x2.6x3.2m, 6.2x2.8x3.2m, 6.2x3.0x3.2m |
Configuration:Feed-in unit:
1. Single unwinder system:
unwinder, pneumatic loading device, automatic stop whenever film is broken off and the tension is to reserve while film is broken off. So as to insure the film to get loosen or moved to the side.
2. Air axis.
3. EPC (edge position control): With functions of manual/ auto/ central reverse. Rewinder may adjust in transverse direction.
4. Automatic tension control system: With magnetic powder brake (10 kg).
5. Paper core ID: 3" (76 mm)
6. Out feed diameter: 1,000 mm
Printing unit:
1.Built up: central drum, printing cylinder, ceramic anilox, chamber type doctor blade.
2.Printing cylinder perimeter: 280-1000mm
3. Printing plate material: resin plate or rubber plate.
4. Transmission: bit central drum's big gear to transmit the printing post.
5. Printing cylinder lift system: cylinder to control printing cylinder move back and forth. The cylinder will move away whenever the machine is stopped and it will automatically move forward while the machine is running.
Rewinder unit:
1. With pneumatic loading system
2. Air axis
3. Paper core ID: 3" (76mm)
4. Max. Rewind diameter: 1,000 mm
Drying system:
1. Hot air drying. Intelligent constant temperature control. 2. All printing units' hot air is supplied by the same one heating unit.
3. Each printing unit is with one drying unit. The air quantity is adjusted by an independent air door or the control panel.
4. Printing units' installed power: about 10 KW.
5. Printing unit's drying system power, about 30 kw.
6. Top drying system includes 3 heating chambers. Each capacity: 10 kw. Independent.
Central drum adjustment
1. The central drum is hollow with 2-layer structure. Made of top alloy steel.
2. Good steel + dynamic balance + surface electroplating. Nice appearance.
3. The central impression roller employed top imported double-lane idler wheels.
4. Support bearing is imported together with the CI drum.
5. The CI drum is with a 32-degree constant temperature system. Water cooling is optional (not included).
6. The CI drum is transmitted by the big gear.
7. The CI drum is with axial encoder. Both the printing cylinder and impression roller are synchronized.
Doctor blade & ink pump
1. With a quick doctor blade replace chamber.
2. It is made of aluminum alloy. Closed type so as to reduce solvent volatilization.
3. To keep ink's viscosity and clean.
4. Doctor blade is closed in the chamber. Easy to replace and clean.
5. Inside the chamber both CW (clockwise) and CCW (counter clockwise) doctor blades are installed. CCW is to close the chamber and CW doctor blade is to scrape the ink.
6. Equal scrape force and easy to adjust.
7. With double-membrane pumps. Stable ink supply.
Frame and steel sheet
1. The frame is made with cast iron alloy of high intensity and low stress. It is cast with resin sand craftwork to insure less shake.
2. Of unitary guide wheel structure.
3. With block building design.
4. Frame thickness: 100 mm
5. Guide roller diameter 100 mm (+ surface anodicoxidation treatment). Spot view for your better understanding. Printing cylinder: Range: 300-1,000 mm with both dynamic balance and static balance treatment. | |
Auto tension control & magnetic powder To control unwinder / rewinder film's tension. | |
Air shaft Standard. East operation. | |
Ultrasonic Web Guide Swift tracking and photo printing. To keep web roll film's edge smooth | |
Single doctor blade: No ink splash. With ink pump to give stable ink supply | |
Chamber type doctor blade To make printing equal. | |
Ink pump Automatic ink absorb. Automatic ink circulation. | |
Automatic lubing system Positive oil big gear | |
Hydraulic oil in center. Auto to-an- back When machine runs, printing cylinder move forward. When it stops, the cylinder moves backward. | |
Dryer (each color unit with 1 set of heater, a long heating channel in the top) 3 top motors (drying heater + blower). Total 30 kw. Printing motor, 1 set, 10 kw. | |
Ceramic anilox roller 300-600 LPI | |
Plate loading Automatic hydraulic device to lift the printing cylinder | |
Auto pneumatic loading/ unloading. Easy and quick. | |
Video Inspection To check printing quality | |
Supplier brand:
Kind reminder: Main motor and key parts may change as per your typical requirements.
1. Main motor, 1 set (Taibang brand)
2. Ink motor, 1 set. (Wanshin brand)
3. Main V. F. drive, 1 set, Delta, Taiwan
4. Electrical/ pneumatic parts, Schmeider
5. Bearing, NSK
6. Ceramic anilox roller, 1 piece each colour, Murata
7. Magnetic powder clutch/ brake, Etlong
8. Air shaft, 1 set, China
9. EPC system, China
10. Contactor,Schmeider
11. Push button, Schmeider
12. Breaker, Schmeider
13. Counter, CHNT
14. Indicator, Schmeider
15.EPC system, 1 set. China
16. Rotational button, Schmeider
17. E-stop, Schmeider
18. Relay, Schmeider Optional parts (extra charges demanded) |
Automatic hydraulic loader/ unloader | |
Big roller frictional rewinder station | |
Double unwinder/ rewinder | |
Italian EPC, RE brand | |
Address:
Shafu Rd 19, 2nd Ind-Zone B, Shabu Villa, Dalong Town, Dongguan City, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Computer Products, Construction & Decoration, Furniture, Industrial Equipment & Components, Manufacturing & Processing Machinery, Packaging & Printing
Company Introduction:
Dongguan Jinsui Plastic Machinery Co., Ltd is a factory based ODM (original designer manufacturer), integrated with R & D, marketing and after-sale service. Mainly builds and sells PE foam plant equipment, deep process machine and plastic film & bag equipment and more.
Take credibility and integrity as the root. Rely on top technology for existence. Keep continuous improvement and perfectness. This is the base of the company existence. Currently, we mainly supply PE Foam Sheet Extrusion Line and related deep process plant equipment, plastic bag and the related auxiliary and deep process equipment. Mainly including: PE Foam Sheet Extrusion Line, PE Foam Sheeting Machine, PE Foam Transverse Cutting Machine, PE Foam Lamination Machine, PE Foam Bonding (thickening, doubling) Machine, PE Foam Bag Making Machine, PE Foam Slitter Rewinder, Vertical PE Foam Sawing Machine, 4-Pillar Punching Machine, Cast Stretch Film Extrusion Machine, Plastic Granule Making Recycler, PE/PP Film Blowing Machine, Flexo Printing Machine, Slow-Gravure Printing Machine, Bag Making Machine, etc.
Our building and selling machines are nearly all ideal equipment of packaging, printing and bag making enterprises. Since launched, they have been favorites of buyers and gained very good reputation and oral praise. As our company′s innovation ability continuously improves, sale quantity increases quickly and large scale production makes the cost reduced, we can guarantee to market with more favourable prices based on top-quality. Jinsui ( Chinese meaning: Golden Harvest) Machinery gives you 1-stop solution. We are ready to fit your needs.
Since founded, Jinsui Machinery not only has been actively exploring the domestic market, but also interenational market. The good name of " Made in Jinsui"has spreaded to global market and global enquiries continuously come into company. We keep the ideology of" Customer No 1, Customer the Most Respectable. "We keep the goal of mutual benefit and win-win cooperation. We are ready to supply buyers with top quality product and sincere service to achieve a business win-win result. Same as before we will reward buyer′s trust and support with top quality product and good service.
Our company has a sound marketing service network and has established a complete set of mature service and supervision mechanism. Jinsui Machinery′s intimate service surely will warm up every customer.